perform® classic concentrate GA

Liquid disinfectant concentrate based on aldehydes (formaldehyde-free) for disinfecting surfaces and equipment.

Our Plus

  • non-foaming and effective
  • excellent material compatibility
  • residue free rinsing
  • suitable for equipment disinfection (e.g. for CIP equipment)
  • efficacy tested according to European norms (EN)


Fields of Application

perform® classic concentrate GA is a liquid concentrate for the disinfection of surfaces, equipment and pipes in industrial production areas (e.g. food processing, pharmaceutical and cosmetic production).
perform® classic concentrate GA is foam-free and is therefore suitable for cleaning-in-place (CIP).

Instructions for use

Heavily contaminated surfaces are to be pre-cleaned. Prepare the working solution by filling water of an appropriate quality into a tub or bucket. Add the concentrate to the water and stir gently.

Apply the working solution to the surfaces to be disinfected:
  • place equipment in the working solution;
  • via cleaning-in-place (CIP);
  • wipe floor and work surfaces;
  • used for personnel and material transfer areas, automatic cleaning machines, etc.

Ensure complete wetting. At the end of the recommended contact time surfaces for food contact should be rinsed evenly with an adequate quantity of water of drinking water quality. Rinse equipment carefully with water.

Microbiological efficacy

EfficacyConcentrationContact time
EN1276, EN13697
- dirty conditions
1.5 % (15 ml/l)15 min.
EN1276, EN13697
- dirty conditions
1 % (10 ml/l)30 min.
EN1276, EN13697
- dirty conditions
0.75 % (7.5 ml/l)1 h
EN1276, EN13697
- dirty conditions
2 % (20 ml/l)5 min.
EN1650, EN13697
- dirty conditions
3 % (30 ml/l)5 min.
- dirty conditions
1 % (10 ml/l)15 min.
- clean conditions
1 % (10 ml/l)15 min.
EN1650, EN13697
- dirty conditions
4 % (40 ml/l)15 min.
EN1650, EN13697
- dirty conditions
1 % (10 ml/l)1 h
virucidal against enveloped viruses
in accordance with DVV (German Registered Association for Combating Viral Diseases
0.5 % (5 ml/l)5 min.

Product data

100 g solution contains the following active substances: 10 g Glutaral, 0.28 g Mixture of 5-Chloro-2-methyl-2H-isothiazol-3-one and

Chemical-physical data

Density:ca. 1.031 - 1.036 g/ml / 20 °C
Color:nearly colourless - light yellow
Flash point:> 100 °C / Method : ISO 2719
pH:1.5 - 4.5 / 20 °C

Special advice

Use biocides safely. Always read the label and product information before use.
For all of the related safety information please refer to the Safety Data Sheet. To request the Safety Data Sheet please
IE: PCS No. 95500

Environmental information

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.

Expert opinion and information

Please visit our website for an overview of all available literature/reports on all schulke products online at
For any queries you might have about the product or using it please call 0114 2543500 or E-mail

Privacy Policy

We use analysis methods (e. g. cookies) to measure how often our site is visited and how it is used.
We embed third-party content from other providers (e. g. videos) on our site. We have no influence on further data processing and any tracking by the third party provider.
In this context, we also use service providers in third countries outside the EU that do not have an adequate level of data protection, which harbors the following risks: Access by authorities without informing the data subject, no data subject rights, no legal remedies, loss of control.
With your settings you consent to the processes described above. You can revoke your consent with effect for the future. You can find more information in our privacy policy.