This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 

gigasept® PAA

Ready-to-use high level disinfectant for the disinfection of flexible endoscopes and medical instruments
gigasept PAA ready to usezoom
 
 
  • aldehyde free
  • broad microbiological effectiveness
  • prevention of biofilm
  • ready-to-use
 

gigasept® PAA is a ready to use high-level disinfectant suitable for disinfection of a variety of medical devices and instruments

Downloads

Expand All
Collapse All
Application areas
 
  • for manual or semiautomated disinfection
  • processing of pre-cleaned flexible endoscope 
  • ophtalmological equipment
  • surgical instruments made of stainless steel 
  • heat sensitive medical devices
Material Compatibility
 

Incompatible materials: iron, toolsteel, aluminium, platinum, nickel-/ chromeplated or non ferrous metal alloys parts (e.g. copper and brass)

Compatible materials: (limited to the maximum contact time; obligatory rinse after contact) polycarbonate, polyurethane, silicone, polysulfone, polyamide, polyester, polystyrene

Instruction for use
 

Application method

gigasept® PAA is ready to use, active immediately and stable over 7 days or 50 cycles. The solution can be tested using gigasept® PAA test stripes.

Always ensure the pre-cleaning of the endoscope and a complete wetting of the surfaces. Immerse hollow objects in such a way that air escapes completely from the lumen.

After the necessary contact time rinse carefully with sterile or filtered water before re-use.

Do not exceed the recommended contact time.
Use of gigasept® PAA test strips

gigasept® PAA test strips turns black or dark blue if the solution is effective. With no change of colour or only partly coloration of the strips the solution is no longer effective and need to be changed.

Dip test strip in the solution for 1 second.

Shake off the excess liquid.

Check the colour in the test zone after 10 seconds.

Ignore colour changes after 15 seconds.

gigasept PAA

Interactions

Avoid the mixing of gigasept® PAA with other products (cleaner, disinfectants), particularly with aldehydes or derivates of halogens (e.g. glutaral, sodium hypochlorite, etc.)

Microbial efficacy/ Contact Time
 

gigasept PAA is effective against:


 Microorganism EN standards
 Contact time
Bacteria 

 EN 1040, EN 13727 (clean conditions)  5 min
Mycobacterium terrae
 EN 143485 min
Fungi 
 EN 1275, EN 13624 5 min
Spores 
EN 14347 (clean conditions)
5 min
Viruses 
EN 14476
5 min

Product data
 

Composition:
100g of gigasept® PAA contains: 0,1 g Peracetic acid
Other ingredients: corrosion inhibitors, surfactants, stabilising agents, excipients

Labelling according to EC directives
 
Xi Irritant.

R41: Risk of serious damage to eyes.

S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S39: Wear eye/face protection.
Special advice
 

USE DISINFECTANT SAFELY. ALWAYS READ THE LABEL AND USE ONLY AS DIRECTED.

For external use only. Do not swallow.

Appropriate personal protection equipment are required

Wearing of gloves are recommended

Avoid contact with eyes. If in eyes, rinse well with water.

Do not mix with detergents or other chemicals.

Do not use after the expiry date.


Information for ordering
 
Product / Accessories Pack Size Case Size Product code
gigasept PAA 5 Ltr 4 x 5 Ltr 195751
gigasept PAA test strips 50 strips in a single tube
195704
Key 1 unit 1 unit 135810
Environmental Information
 

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.

Contact

Schulke India Pvt. Ltd.

A-24/10,Mohan Co-Operative
Industrial Estate,Mathura Road
New Delhi - 110044 , India
Direct Line: +91 11 49786688
Phone: +91 011 49786666/42595050

Fax:     +91 011 49786699

Email:   india.office@schuelke.com