This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 
 
 

TPH protect

Concentrate for cleaning and disinfection of medical devices and other surfaces.

Downloads

Our Plus

  • good cleaning performance
  • very wide antimicrobial efficacy
  • colour & perfume free
  • aldehyde free
Expand All
Collapse All
Fields of Application
 
Disinfection and cleaning of medical devices and other surfaces
  • In all hospital areas (e.g. wards, ICU, theatres)
  • Particularly for odour-sensitive areas (e.g. neo-natal intensive care units)
  • On sensitive materials (e.g. acrylic glass)
  • in critical/ sensitive production areas (e.g. pharmaceutical and cosmetical industry)
Instructions for use
 
Prepare use-solution in concentration required. Make sure to wet surfaces completely and keep them wet for the whole exposure time. Exact dosages can be achieved with the use of schülke dosage aids. Wipe surfaces with a damp cloth. Not for final disinfection of semicritical and critical medical devices!
Always aim for complete surface coverage. Rinse equipment carfully with water. In order to avoid loss of microbiological effectiveness do not mix this product with any other cleaners. Therefore, please seek advice from schülke before attempting such mixtures.
Microbiological efficacy
 
Efficacy Concentration Contact time
tuberculocidal
in a suspension test
0.5 % (5 ml/l) 2 h
virucidal against enveloped viruses
in accordance with DVV (German Registered Association for Combating Viral Diseases
1 % (10 ml/l) 15 min.
virucidal against enveloped viruses
in accordance with DVV (German Registered Association for Combating Viral Diseases
0.5 % (5 ml/l) 60 min.
Norovirus
- dirty conditions
2 % (20 ml/l) 2 h
Norovirus
- clean conditions
1 % (10 ml/l) 2 h
Rotavirus
0.25 % (2.5 ml/l) 15 min.

Certificates

  • VAH certificate
Product data
 
Composition:
100 g solution contains the following active substances:
22 g Alkyl (C12-16) dimethylbenzyl ammonium chloride (ADBAC/BKC (C12-C16)), 17 g 2-Phenoxyethanol, 0.9 g Amines, N-C12-C14 (even numbered)-alkyltrimethylenedi-, reaction products with chloroacetic acid)
Labelling according to Regulation (EC) No. 648/2004:
5 - 15 % non-ionic surfactants

Chemical-physical data

Density:ca. 1,0 g/cm3 / 20 °C
Color:nearly colourless
Flash point:51 °C / Method : DIN 51755 Part 1
Viscosity, dynamic:ca. 21 mPa*s / 20 °C / Method : ISO 3219
Form:liquid
pH:ca. 8,6 / 20 °C / concentrate
Special advice
 
Use disinfectants safely. Always read the label and product information before use.
Information for order
 
ItemDelivery formItem no.
TPH protect 5 l1/Canisteron request
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Application aids
 
Item Item no.
schülke dosing feeder 5 l / 10 l (20ml / stroke) 117101
Decanter funnel 117901
tap for 20/ 25 lt can 126101
schülke tap for 5 l / 10 l can 135501
Key for 5/10 lt can (Draak) 135801
Can key for 5 + 10 l 135810
measuring cup 500 ml 136101
measuring cup 50 ml 136102
schülke dosing feeder 20 l / 25 l (20ml / stroke) 182501
Opener all-in-one (1l eurobottle/can/container) 70000804
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.
EuroNormCE 0297