This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 
 
 

dentavon® liquid

dentavon® liquid is a ready to use, liquid disinfection fluid for the immersion-disinfection of molded material.

Downloads

Our Plus

  • ready to use solution
  • extensive action spectrum within 5 minutes
  • excellent material compatibility
  • for the fast immersion-disinfection of dentalimpressions
Expand All
Collapse All
Fields of Application
 
For the disinfection of dental components and prosthetic material as well as dental moldings made from silicon, polyether and alginate.
Instructions for use
 
Pour the required amount of solution into a suitable container, briefly immerse the alginate and subsequently leave to dry for 5 minutes. Immerse other materials into the solution for 5 minutes. dentavon® liquid disinfects without negatively influencing the dimension characteristics and the surface quality. dentavon® liquid can be used throughout an entire workingday. The solution should be changed more frequently in case of excessive soiling. Due to hygienic reasons and in order to avoid the transfer of bacteria and infections, the dental impressions of a dental practice should always be disinfected prior to the transfer to the dental laboratory. If the dental laboratory is not sure, if the impressions have been disinfected, a disinfection of the material from the practice should be effected in all instances.
Microbiological efficacy
 
Efficacy Concentration Contact time
bactericidal
in accordance with VAH
ready-to-use 5 min.
yeasticidal
in accordance with VAH
ready-to-use 5 min.
virucidal against enveloped viruses
in accordance with DVV (German Registered Association for Combating Viral Diseases
ready-to-use 5 min.

Certificates

  • VAH certificate
Product data
 
Composition:
100 g dentavon® liquid contains: 0.98 g Glyoxal, 0.98 g Glutaral.

Chemical-physical data

Form:liquid
Density:ca. 1,01 g/cm3 / 20 °C
Flash point:Not applicable
Color:light blue
pH:ca. 3,4 / 20 °C / (undiluted)
Special advice
 
Always read the label and product information before use.
Renowned manufacturers of standard impressions advise that the manufacturer's instructions are to be observed implicitly inorder to avoid application problems during the imprinting andthe subsequent processing. This especially concerns the observation of specified mixing-, process- and curing times, the usageof suitable impression spoons as well as a quick and bubble-free pouring of the impression with a compatible plaster after thesuccessful taking of the impression.
This significantly influences the quality of the impressions andtherefore the quality of the dental components to be produced.
During the disinfection of impressions with dentavon® liquidthe prescribed reaction time of 5 minutes in the immersion bath should be particularly observed.
Do not store the package above room temperature and alwayskeep it sealed.
Application aids
 
Item Item no.
schülke dosing feeder 5 l / 10 l (20ml / stroke) 117101
Decanter funnel 117901
schülke tap for 5 l / 10 l can 135501
Can key for 5 + 10 l 135810
measuring cup 500 ml 136101
measuring cup 50 ml 136102
Desinfektionswanne basic set 144312
Opener all-in-one (1l eurobottle/can/container) 70000804
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
CE 0297