This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 
 
 

dialox™ active

dialox™ active is a highly efficient disinfectant and descaling agent. Its formulation is based on active oxygen that can be used in hemodialysis machines and water treatment units.

Downloads

Our Plus

  • Complete microbiocidal spectrum
  • Disinfection and decalcification in one step
  • Ready to use
  • Short contact time
  • Detectable by conductivity
Expand All
Collapse All
Fields of Application
 
Unique disinfectant and descaler for the hygiene of hydraulic circuits of dialysis machines and water treatment systems in dialysis centres.

Application tips
  • Compatible with dialysis machines
  • Compatible with water treatment equipment
  • Prevents the formation of biofilms on surfaces of hydraulic circuits
Instructions for use
 
dialox™ active can be used regularly as a sole hygiene product in dialysis equipments in the chemical disinfection programs.
dialox™ active is ready to use (proportions are automatically calculated an diluted by the machines - follow the recommendations of the manufacturer of the dialysis equipment, e.g. 1/25 or 1/35 at 20°C or 37°C).
Developed for simultaneous disinfection and decalcification of dialysis equipment.
The rinse process should be controlled with residual peroxide test strips. Carefully follow the instructions for use packed together with the test strips. Perform the residual control in accordance with the operators manual of the machine in use.
Microbiological efficacy
 
Efficacy Concentration Contact time
bactericidal
EN14561
1 % (10 ml/l)
37 °C
5 min.
mycobactericidal
EN14563
3 % (30 ml/l)
37 °C
5 min.
mycobactericidal
EN14348
4 % (40 ml/l)
37 °C
5 min.
yeasticidal
EN14562
1 % (10 ml/l)
37 °C
5 min.
fungicidal
EN14562
4 % (40 ml/l)
37 °C
5 min.
virucidal
EN14476
3 % (30 ml/l)
37 °C
10 min.
Product data
 
Composition:
100g of dialox™ active contain the following active ingredients: 1g peracetic acid [CAS N° 79-21-0] and 7g hydrogen peroxide [CAS N° 7722-84-1].

Chemical-physical data

Density:1,04 g/cm3 / 20 °C
Viscosity, dynamic:not determined
Flash point:Not applicable
Form:liquid
Color:colourless
pH:1,5 / 20 °C / concentrate
Special advice
 
Recommended storage temperature: 5-30°C. Provide sufficient air exchange and/or exhaust in work rooms. Handle and open container with care. Never return unused material to storage receptacle. Keep away from heat and direct sunlight. Store in a cool place. Do not keep container sealed. Store in up-right position only.
Compatibily with materials


dialox™ active has a good material compatibilty with stainless steel, PTFE, PVDF, PEHD, PP.

Interactions


Mixing of dialox™ active with other products should be avoided, particularly with aldehyds or derivates of halogens (e.g. sodium hypochlorite and others).
Information for order
 
ItemDelivery formItem no.
dialox active (4 x 5 l KA)/Cartonon request
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Application aids
 
Item Item no.
Can key for 5 + 10 l 135810
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
CE 0297
Manufacturer:
Bioxal SA
Route des Varennes - Secteur A
BP3007271103 Chalon-sur-Saône
France