Gentle, pH-neutral cleaner for manual reprocessing.
- cleans even alkali-sensitive materials (e.g. anodised aluminium)
- removes even stubborn contaminations (e.g. protein, oil, blood, grease, wax and silicon)
- self-acting, gentle, but very thorough cleaning effect
- provides lasting protection against corrosion damage
- free from caustic alkaline and from chlorine compounds
- proven tolerability with materials used for instruments manufactured by KARL STORZ
Powder based cleaner for the manual reprocessing of medical devices, laboratory equipment, technical facilities and items made out of stainless steel, anodized aluminum, plastics, rubber, porcelain, quarz, ceramics. For the use in ultrasonic-bath.
Prepare edisonite® super preferably with warm water depending on the degree of contamination. Dispense the quantity required with the aid of a measuring cup. Normal level of contamination: 0.5 % (5 g / l water), high level of contamination: 1.0 % (10 g / l water). Application time 10 - 20 min.
Completely submerge objects in the diluted solution and be sure they are sufficiently covered. Following application, rinse objects in clear water, using demineralized water if necessary and disinfect/sterilise if required. To optimize results, heat the solution (up to the boiling point, if necessary). Temperatures should not exceed 60 ºC when cleaning non-anodized aluminium; when treating objects with protein contamination, temperatures should not exceed 40 ºC in order to avoid denaturation of proteins.
Labelling according to Regulation (EC) No 648/2004: > 30 % Phosphates,< 5 % anionic surfactants, < 5 % non-ionic surfactants.
Contains: Reaction product of Benzenesulfonic acid, 4-C10-13-sec-Alkyl derivs. and Benenesulfonic acid, 4-Methyl and Sodium hydroxid.
Viscosity, dynamic:Not applicable
Flash point:Not applicable
pH:7,5 / 10 g/l / 20 °C
For professional use only.
Keep container tightly closed. Protect from frost, heat and sunlight. Store at room temperature in the original container.
Not suitable for brass and zinc. For best material compatibility it is suggested that the anodized layer on the medical products made of aluminum should be intact.
|Item||Delivery form||Item no.|
|edisonite super 1kg Dose||12/Carton||on request|
|edisonite super 5 KG||1/bucket(S)||on request|
These products are not available in every country. For more information please contact our local subsidiary or distributor.
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.