This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 
 
 

mucocit® T

Aldehyde-free high-performance disinfectant with strong cleaning effect for manual reprocessing

Downloads

Our Plus

  • broad spectrum of efficacy at short exposure times
  • aldehyde-free and high intensity cleaning performance
  • excellent material compatibility, compatible even with sensitive materials
  • approved for RICHARD WOLF und KARL STOLZ instruments

Expand All
Collapse All
Fields of Application
 
mucocit® T is for the manual cleaning and disinfection of medical instruments and is particularly suitable for the preparation of sensitive materials such as flexible endoscopes, MIC instruments, rotating instruments and anaesthesia materials. mucocit® T is compatible with the enzymatic high-performance cleaner mucadont® zymaktiv. mucocit® T is also extremely suitable for ultrasonic bath use.
Instructions for use
 
mucocit® T is a concentrate and is diluted with cold water to produce the desired application concentration.
Dosage: depending on the degree of effectiveness 1 % - 6 %.
Application example: 1 litre of a 2 % working solution corresponds to 980 ml of water and 20 ml of mucocit® T.
Place endoscopes and instruments for reprocessing in the mucocit® T solution immediately after use. Ensure complete covering of the surfaces, also of hollow instruments, and allow to take effect. Rinse all instruments thoroughly after cleaning, using water of at least drinking water quality, or preferably sterile distilled water or fully deionized water, to completely remove residues of the cleaning solution.
Please follow the reprocessing recommendations of the instrument manufacturers. Renew the application solution every workday or if there is visible contamination. National regulations may require that cleaning and disinfection are carried out in two separate process steps. Not for final disinfection of semicritical and critical medical devices!
Microbiological efficacy
 
Efficacy Concentration Contact time
bactericidal
in accordance with VAH
- dirty conditions
3 % (30 ml/l) 15 min.
bactericidal
in accordance with VAH
- dirty conditions
4 % (40 ml/l) 5 min.
bactericidal
in accordance with VAH
- dirty conditions
2 % (20 ml/l) 30 min.
mycobactericidal
in accordance with VAH
- dirty conditions
3 % (30 ml/l) 15 min.
mycobactericidal
in accordance with VAH
- dirty conditions
6 % (60 ml/l) 5 min.
mycobactericidal
in accordance with VAH
- dirty conditions
2 % (20 ml/l) 30 min.
yeasticidal
in accordance with VAH
- dirty conditions
4 % (40 ml/l) 5 min.
yeasticidal
in accordance with VAH
- dirty conditions
3 % (30 ml/l) 15 min.
yeasticidal
in accordance with VAH
- dirty conditions
2 % (20 ml/l) 30 min.
virucidal against enveloped viruses
in accordance with DVV (German Registered Association for Combating Viral Diseases
- dirty conditions
1 % (10 ml/l) 5 min.
Adenovirus
in accordance with DVV (German Registered Association for Combating Viral Diseases
- dirty conditions
4 % (40 ml/l) 15 min.
Adenovirus
in accordance with DVV (German Registered Association for Combating Viral Diseases
- dirty conditions
2 % (20 ml/l) 30 min.
Polyoma SV40
in accordance with DVV (German Registered Association for Combating Viral Diseases
- dirty conditions
4 % (40 ml/l) 5 min.
Polyoma SV40
in accordance with DVV (German Registered Association for Combating Viral Diseases
- dirty conditions
3 % (30 ml/l) 15 min.

Certificates

  • VAH certificate
Product data
 
Composition:
Each 100 g of active substance solution contains the folliwing active ingedients: 3.9 g didecyldimethylammonium chloride, 4.5 g alkyl-propylen diamine 1.5-bisguanidinium acetate, 2 g bis(aminopropyl)-laurylamine, 2.8 g lauryl propylene diamine.
Labelling according to Regulation (EC) No. 648/2004: 5 - 15 % EDTA and salts thereof, 5 - 15 % non-ionic surfactants, perfumes, Limonene, Citronellol. Contains Piperazine.


Chemical-physical data

Form:liquid
Density:ca. 1,03 g/cm3 / 20 °C
Flash point:No data available
Viscosity, dynamic:No data available
Color:blue
Special advice
 
Always read the label and product information before use.
Do not use this product after the expiry date.
Material compatibility: Alkali-sensitive materials like anodized aluminum should be tested at a suitable place.

Information for order
 
ItemDelivery formItem no.
mucocit-T 2 l FL5/Cartonon request
mucocit-T 5 l KA1/Canisteron request
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Application aids
 
Item Item no.
Can key for 5 + 10 l 135810
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
CE 0297