This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 
 
 

perform® classic concentrate OXY

Powdered concentrate based on active oxygen for disinfecting surfaces.

Downloads

Our Plus

  • sporicidal and material compatible
  • convenient single-use sachets
  • colour free
  • efficacy tested according to European norms (EN)
Expand All
Collapse All
Fields of Application
 
Disinfection of all types of surfaces. perform® classic concentrate OXY is suitable for use in all high-risk areas where, in addition to broad effectiveness, strict requirements are placed on the environmental behaviour and user-friendliness of a surface disinfectant. Due to the excellent material compatibility of the active solution, perform® classic concentrate OXY can also be used with problematic materials, such as acrylic glass (incubators).
Instructions for use
 
To prepare the working solution, first add water (preferably hand-warm) to the tub or bucket, then sprinkle in and dissolve the product.
For example:

1 sachet (40 g) for 8 L = 0.5 % solution

2 sachets (40 g) for 8 L = 1 % solution

Heavily contaminated surfaces are to be pre-cleaned. Ensure complete wetting. Contact time has to be considered. Rinse surfaces intended to be in direct contact with final products. To prevent the build-up of residue on treated surfaces, keep residual moisture on surfaces to a minimum after wiping.
perform® classic concentrate OXY has excellent cleaning properties, therefore mixing it with cleaning boosters is not necessary. The composition of the active ingredient system in the active solution remains stable for one working day. If the active solution becomes very dirty, replace it earlier.
Microbiological efficacy
 
Efficacy Concentration Contact time
bactericidal
EN1276- dirty conditions
0.5 % (5 g/l) 5 min.
fungicidal
EN1650, EN13697- dirty conditions
1.5 % (15 g/l) 60 min.
virucidal against enveloped viruses
in accordance with DVV (German Registered Association for Combating Viral Diseases
0.5 % (5 g/l) 5 min.
Product data
 
Composition:
100 g powder contains the following active substances: 45 g Pentapotassium bis(peroxymonosulphate) bis(sulphate).
Labelling according to Regulation (EC) No. 648/2004: 5 - 15 % anionic surfactants, < 5 % non-ionic surfactants, < 5 % soap, < 5 % phosphonates, perfumes.

Chemical-physical data

Form:granular
Flash point:Not applicable
Color:white
Viscosity, dynamic:Not applicable
pH:ca. 4 / 5 g/l / 20 °C / in water
Special advice
 
Use disinfectants safely. Always read the label and product information before use.
Do not store bags above room temperature. Wearing of protective gloves (e.g. made of Nitrile rubber) is recommended. The active solution may bleach textile dyes that are highly sensitive.
Information for order
 
ItemDelivery formItem no.
perform® classic concentrate OXY 250x40g sachets1/Cartonon request
perform® classic concentrate OXY 60x40g Beutel CH1/Cartonon request
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
EuroNorm