This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 
 
 

perform® classic concentrate PAA

Liquid concentrate peracetic acid based for disinfecting surfaces

Downloads

Our Plus

  • Fast, effective and residue free
  • sporicidal efficacy
  • Convenient single use bottle
  • Colour and perfume free
  • efficacy tested according to European norms (EN)
Expand All
Collapse All
Fields of Application
 
perform® classic concentrate PAA is a liquid concentrate for disinfection of surfaces, equipment and devices in industrial production areas.
perform® classic concentrate PAA is suitable for use in all high-risk areas where, in addition to broad effectiveness, strict requirements are placed on the environmental behaviour of a surface disinfectant.
Instructions for use
 
Heavily contaminated surfaces are to be pre-cleaned.
Prepare the working solution by filling water of an appropriate quality into a tub or bucket. Add the concentrate to the water and stir gently.
For example:
1 bottle (40 ml) for 4 L = 1 % solution.
Wipe the pre-cleaned surfaces. Ensure complete wetting. Observe the required contact time. At the end of the recommended reaction period surfaces that have food contact should be rinsed evenly with an adequate quantity of water of drinking water quality. Rinse equipment carefully with water.
Microbiological efficacy
 
Efficacy Concentration Contact time
bactericidal
EN1276, EN13697
0.25 % (2.5 ml/l) 5 min.
yeasticidal
EN1650, EN13697
0.2 % (2 ml/l) 15 min.
yeasticidal
EN1650, EN13697
0.3 % (3 ml/l) 5 min.
fungicidal
EN1650, EN13697
3 % (30 ml/l) 5 min.
fungicidal
EN1650, EN13697
2 % (20 ml/l) 15 min.
virucidal against enveloped viruses
in accordance with DVV (German Registered Association for Combating Viral Diseases
0.5 % (5 ml/l) 10 min.
sporicidal
EN13697
1 % (10 ml/l) 5 min.
Product data
 
Composition:
100 g perform® classic concentrate PAA contain the following active ingredient: 6.2 g Peracetic acid.
Contains: Hydrogen peroxide, Acetic acid

Chemical-physical data

Density:ca. 1,11 g/cm3 / 20 °C
Color:colourless
Form:liquid
Flash point:Not applicable
Viscosity, dynamic:No data available
pH:< 1 / 20 °C / concentrate
Special advice
 
Use disinfectants safely. Always read the label and product information before use.
Professional use only. Read safety data sheet before use.
Good material compatibility with stainless steel, PTFE, PVDF, PEHD, PP, Viton, glass, etc.
Contact with non-ferrous metals (brass, copper) should be avoided.
Recommended storage temperature 5 - 25 °C.
IE: PCS No. 97201
Information for order
 
ItemDelivery formItem no.
perform classic conc PAA 12x40 ml FL1/Cartonon request
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
EuroNorm