This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 
 
 

pursept® A Xpress

Ready-to-use alcohol-based rapid disinfection for non-invasive medical products and other surfaces.

Downloads

Our Plus

  • ready to use and highly effective in only 15 seconds
  • broad biocidal activity
  • dries rapidly with hardly leaving any smears
  • very fresh fragrance
  • dermatologically tested
Expand All
Collapse All
Fields of Application
 
Alcohol-based rapid disinfection of medical devices and other surfaces in all areas with an increased risk of infection and where short contact times are required, e.g.:
  • Patient nearby surfaces
  • Patient treatment units
  • Examination couches
  • Operating tables and nearby work surfaces
  • Surfaces of medical equipment
Instructions for use
 
Microbiological efficacy
 
Efficacy Concentration Contact time
bactericidal
in accordance with VAH Guidelines with short contact times
- clean conditions
ready-to-use 15 sec.
tuberculocidal
in accordance with VAH Guidelines with short contact times
- dirty conditions
ready-to-use 30 sec.
yeasticidal
in accordance with VAH Guidelines with short contact times
- clean conditions
ready-to-use 15 sec.
virucidal against enveloped viruses
in accordance with DVV (German Registered Association for Combating Viral Diseases
ready-to-use 15 sec.
Adenovirus
in accordance with DVV (German Registered Association for Combating Viral Diseases
ready-to-use 1 min.
Norovirus
EN14476- dirty conditions
ready-to-use 15 sec.
Rotavirus
in accordance with DVV (German Registered Association for Combating Viral Diseases
ready-to-use 15 sec.

Certificates

  • IHO listed
  • VAH certificate
Product data
 
Composition:
100 g agent solution contain the following active ingredients:
58,6 g Ethanol (94%) , 0.03 g Amines, N-C12-C14 (even-numbered)-alkyltrimethylenedi-, reaction products with chloroacetic acid.
Labelling according to Regulation (EC) No 648/2004: perfume

Chemical-physical data

Flash point:23 °C
Color:colourless
Form:liquid
Density:ca. 0,90 g/cm3 / 20 °C
Viscosity, dynamic:No data available
pH:7,5 / 20 °C / (undiluted)
Special advice
 
Instruction for use
pursept® A Xpress is a ready-to-use solution. Apply the undiluted pursept® A Xpress onto objects and surfaces, wipe and allow it to take effect. Always aim for complete surface coverage. Maximum application rate 50 ml/m². Make sure that all visible soiling is removed
before disinfection. Do not treat surfaces that are sensitive to alcohol, e.g. acrylic glass. Not for final disinfection of semicritical and critical medical devices!

Use disinfectants safely. Always read the label and product information before use.
The product is highly compatible with metals and synthetics (except acrylic glass and alcohol-sensitive varnishes).
Wearing gloves is reommended. Do not use near ignition sources.
Please follow carefully any national fire and explosion protection guidelines when using alcohol-based disinfectants.
Information for order
 
ItemDelivery formItem no.
pursept® A Xpress 5 l1/Canisteron request
pursept® A Xpress 1 l spray bottle10/Cartonon request
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Application aids
 
Item Item no.
schülke dosing feeder 5 l / 10 l (20ml / stroke) 117101
Decanter funnel 117901
Bed bracket for square bottle 1 l (straight) 134413
Bed bracket for 1 l square bottle (curved) 134415
wall bracket plastics 1l 134416
schülke tap for 5 l / 10 l can 135501
Can key for 5 + 10 l 135810
measuring cup 500 ml 136101
Opener all-in-one (1l eurobottle/can/container) 70000804
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
EuroNormCE 0297