quartacid® plus

Liquid concentrate for disinfecting and cleaning surfaces. Based on quaternary ammonium compounds.

Our Plus

  • for disinfecting and cleaning
  • pH value is acidic, for the removal of calcium deposits
  • good foaming properties
  • rinse off without residue
  • without colorant and perfume
  • efficacy tested according to European norms (EN)

Downloads

Fields of Application

quartacid® plus has, in addition to its disinfecting action, excellent cleaning properties. It is suitable for cleaning and disinfecting surfaces in one single operation in:
  • All areas where food is processed and/or prepared
  • The pharmaceutical industry
  • The cosmetics industry

Instructions for use

Cleaning and disinfection in one step.
Heavily contaminated surfaces are to be pre-cleaned e.g. with an alkaline foam cleaner.
Prepare working solution in desired concentration.
Apply the application solution by wiping or immersion or low pressure systems. Ensure complete wetting.

Microbiological efficacy

EfficacyConcentrationContact time
bactericidal
EN1276
- dirty conditions
2.5 % (25 ml/l)
10 °C
30 min.
bactericidal
EN1276
- dirty conditions
1.5 % (15 ml/l)
20 °C
60 min.
bactericidal
EN1276
- dirty conditions
1.5 % (15 ml/l)
10 °C
60 min.
bactericidal
EN13697
- clean conditions
0.5 % (5 ml/l)
20 °C
30 min.
bactericidal
EN13697
- dirty conditions
2.5 % (25 ml/l)
10 °C
30 min.
bactericidal
EN13697
- dirty conditions
1 % (10 ml/l)
20 °C
60 min.
bactericidal
EN1276
- clean conditions
1 % (10 ml/l)
20 °C
15 min.
bactericidal
EN1276
- clean conditions
1 % (10 ml/l)
10 °C
60 min.
bactericidal
EN13697
- clean conditions
3 % (30 ml/l)
2 °C
15 min.
bactericidal
EN1276
- clean conditions
1.5 % (15 ml/l)
10 °C
30 min.
bactericidal
EN13697
- clean conditions
1 % (10 ml/l)
10 °C
60 min.
bactericidal
EN1276
- clean conditions
0.5 % (5 ml/l)
20 °C
30 min.
bactericidal
EN1276
- dirty conditions
1 % (10 ml/l)
20 °C
30 min.
bactericidal
EN13697
- dirty conditions
1.5 % (15 ml/l)
20 °C
30 min.
bactericidal
EN13697
- clean conditions
1 % (10 ml/l)
20 °C
15 min.
bactericidal
EN13697
- dirty conditions
1.5 % (15 ml/l)
10 °C
60 min.
bactericidal
EN13697
- clean conditions
1.5 % (15 ml/l)
10 °C
30 min.
Listeria monocytogenes
in accordance with DVG
- dirty conditions
0.25 % (2.5 ml/l)
20 °C
2 min.
Salmonella spp.  
EN1276
- dirty conditions
0.25 % (2.5 ml/l)
20 °C
1 min.

Product data

Composition:
100 g solution contains the following active substances: 15.4 g Didecyldimethylammonium chloride
Labelling according to Regulation (EC) No. 648/2004: < 5% non-ionic surfactants

Chemical-physical data

Color:nearly colourless
Form:liquid
Flash point:39 °C / Method : ISO 2719
Viscosity, dynamic:approx. 18 mPa*s / 20 °C / Method : ISO 3219
Density:approx. 1,01 g/cm3 / 20 °C
pH:approx. 1,4 / 20 °C

Special advice

Use disinfectants safely. Always read the label and product information before use.
Do not inhale the aerosol.
At the end of the recommended contact time surfaces with food contact should be rinsed evenly with an adequate quantity of water of drinking water quality.

Information for order

ItemDelivery formItem no.
quartacid® plus 2l bottle5/Cartonon request
quartacid® plus 10l KA1/Canisteron request
quartacid® plus 500l EC1/Containeron request
quartacid plus 20 l KA1/Canisteron request
These products are not available in every country. For more information please contact our local subsidiary or distributor.

Application aids

ItemItem no.
schülke dosing feeder 5 l / 10 l (20ml / stroke)117101
Decanter funnel117901
schülke tap for 5 l / 10 l can135501
Can key for 5 + 10 l135810
measuring cup 500 ml136101
doser for 2 lt bottles183401

Environmental information

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.
EuroNorm

Privacy Policy

We use analysis methods (e. g. cookies) to measure how often our site is visited and how it is used.
We embed third-party content from other providers (e. g. videos) on our site. We have no influence on further data processing and any tracking by the third party provider.
In this context, we also use service providers in third countries outside the EU that do not have an adequate level of data protection, which harbors the following risks: Access by authorities without informing the data subject, no data subject rights, no legal remedies, loss of control.
With your settings you consent to the processes described above. You can revoke your consent with effect for the future. You can find more information in our privacy policy.