This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information

s&m care additive

For care and cleaning of floorings. Can be mixed with schülke surface disinfectants.


Our Plus

  • intensive cleaning effect
  • tested ability to mix with schülke surface disinfectants
  • maintains a special shine and care film
  • reduces the adherence of dirt to floor surfaces
  • drying free of streaks
  • economical consumption due to low dosing
Expand All
Collapse All
Fields of Application
High-quality special products for intensive cleaning and care of floorings that can be wiped wet. Product properties are designed for an optimal cleaning result and an optical care effect (matt finish) on treated surfaces. The formulation is highly concentrated on the basis of non-ionic surfactants, water-soluble solvents (for removal of residues adhering to the floor) and high-quality care substances for floors.
Instructions for use
s&m care additive is, among others, specifically suitable for application to surfaces that are usually treated with schülke surface disinfectants. Direct mixing with the stock solution of schülke surface disinfectants is possible. Moreover, using s&m care additive in a corresponding specified dilution is also recommended for separate maintenance cleaning of floorings that can be wiped wet. s&m care additive is suitable for application to all water-resistant, uncoated and hard-coated floors and types of flooring, such as PVC, linoleum, rubber knobs and stone.
Application methods
Within the scope of measures for maintenance cleaning and surface disinfection in clinical-medical areas, mixing the stock solutions of surface disinfectants with a suitable cleaning and care additive can be useful in order to improve the cleaning effect and optics of treated floor surfaces. By admixing s&m care additive to the stock solution of schülke surface disinfectants, the cleaning effect is increased on the one hand, and the optical appearance of treated floors surfaces can be improved on the other hand. Possible disinfectant residues are well dissolved by means of surface cleaning with s&m cleaning additive and can be removed during wiping process. For the application of s&m care additive, prepare the stock solution in the desired concentration and apply it to floor and surfaces by means of 2-mop-wet-wipe method. Machine polishing of treated floorings in a high-speed process after drying increases the optical shine and care effect.
Application concentration
s&m care additive should be dosed from 0.25 % to 1 % depending on the desired optical effect and present degree of soiling.
Product data
Labelling according to Regulation (EC) No. 648/2004:
5 - 15 % non-ionic surfactants, perfumes, Linanool, Hexylcinnamal, Amylcinnamal, Benzylsalicylate, Methylisothiazolinone, Methylchloroisothiazolinone

Chemical-physical data

Density:ca. 1,00 g/cm3 / 20 °C
Viscosity, dynamic:No data available
Flash point:> 60 °C / Method : DIN 51755 Part 1
pH:4 - 5 / 20 °C / concentrate
Special advice
The ability to mix with schülke surface disinfection preparations has been examined and tested with regard to microbiology on the basis of the efficacy requirements by the German Association of Applied Hygiene [VAH]. s&m care additive is also especially suitable for combined use with surface disinfectants on the basis of cationic ingredients. With these types of products, the risk of surface attachment behaviour and formation of residue on floor surfaces can be considerably reduced by admixing s&m care additive to the disinfectant stock solution. With routine use of cationic surface disinfectants, the interim cleaning with s&m cleaning additive, e.g. 1x per week, has also proven to be effective regarding the removal of excess formation of residue on treated floors.

s&m care additive can be mixed with the stock solution of the following schülke surface disinfectants: antifect® FF, antifect® AF (N), terralin® protect, pursept® AF, s&m cleaning additive. Here, the mixing ratio should not exceed the selected application concentration of the disinfectant.
Safety data sheet is available on request for professional use.
Information for order
ItemDelivery formItem no.
s&m care additive 2 l bottle5/Cartonon request
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Application aids
Item Item no.
measuring cup 500 ml 136101
Environmental information
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.