This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 
 
 

s&m cleaning additive

Powerful cleaning performance. Can be mixed with schülke surface disinfectants.

Downloads

Our Plus

  • intensive cleaning effect, even removes disinfectant residues
  • tested ability to mix with schülke surface disinfectants
  • can be used for maintenance cleaning on all surfaces that can be wiped wet (floorings and inventory)
  • drying streak-free
  • economical consumption due to very low dosing
Expand All
Collapse All
Fields of Application
 
s&m cleaning additive is a high-quality maintenance cleaner for intensive cleaning of floorings that can be wiped wet and inventory surfaces. The product properties are designed for an optimal cleaning result, good dissolution of dirt, optics streak-free, convenient user properties as well as a very economical consumption. The formulation is highly concentrated on the basis of non-ionic surfactants and solubilisers (for removal of residues adhering on surfaces).
Instructions for use
 
s&m cleaning additive is suitable for maintenance cleaning of all floorings, inventory surfaces, wall, doors, furniture etc. that can be wiped wet. The product distinguishes itself by an excellent compatibility of materials (among others, with commercial coatings and wax care films). In order to increase the cleaning effect, s&m cleaning additive can be mixed with the stock solution of schülke surface disinfectants. When mixed in a practically common dilution, the microbiological disinfectant efficacy is preserved: antifect® AF (N), antifect® FF, pursept® AF and terralin® protect
Application methods
For maintenance cleaning of floor surfaces, the prepared stock solution should be applied via practically common wipe mops by means of wet-wipe process. s&m cleaning additive can also be applied via cleaning machines. Treat inventory surfaces, furnishings etc. with suitable wipes.
s&m cleaning additive maintains the absorptive capacity of textile fibres of mop covers and wipes. The application of s&m cleaning additive has especially proven successful in areas where floorings are usually treated with surface disinfectants. Above all, surface disinfectants based on cations can tend to leave residues on treated floorings over time. Alternating interim cleaning (thorough cleaning) of these floorings with s&m cleaning additive removes adherent residues and thus helps to prevent an undesired "sticky effect".
Under these conditions, applying s&m cleaning additive 1 - 2 x per week has proven successful in practice.
Application concentration
s&m cleaning additive should be dosed from 0.25 % to 1 % depending on the present degree of soiling and desired cleaning effect.
Product data
 
Labelling according to Regulation (EC) No. 648/2004:
5 - 15 % non-ionic surfactants, perfumes, linalool, hexyl cinnamal, citronellol, benzyl salicylate, benzylalkohol, butylphenyl methylpropional, alphaisomethylionone

Chemical-physical data

Form:liquid
Color:violet
Flash point:> 100 °C / Method : ISO 2719
Density:ca. 1,04 g/cm3 / 20 °C
Viscosity, dynamic:No data available
pH:9,5 / 20 °C / concentrate
Special advice
 
If required, s&m cleaning additive can also be mixed directly with the stock solution of schülke surface disinfectants in order to increase the cleaning performance. The ability to mix has been examined and evaluated with regard to microbiology on the basis of the efficacy requirements by the German Association for Hygiene and Microbiology [VAH]. We recommend using s&m care additive as a special wipe care to achieve the desired additional optical care effect on floorings. In connection with the known schülke surface disinfectants, s&m cleaning additive and s&m care additive are a system solution designed to meet your individual needs for floor reprocessing with regard to the following desired effects: disinfection effect, cleaning performance and achievable optics.

s&m cleaning additive can be mixed with the stock solution of the following schülke surface disinfection preparations: antifect® AF (N), antifect® FF, pursept® AF, s&m care additive, terralin® protect.
Here, the mixing ratio should not exceed the selected application concentration of the disinfectant.
Information for order
 
ItemDelivery formItem no.
s&m cleaning additive 2 l bottle5/Cartonon request
s&m cleaning additive 5 l1/Canisteron request
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Application aids
 
Item Item no.
schülke dosing feeder 5 l / 10 l (20ml / stroke) 117101
Decanter funnel 117901
schülke tap for 5 l / 10 l can 135501
Can key for 5 + 10 l 135810
measuring cup 500 ml 136101
measuring cup 50 ml 136102
Opener all-in-one (1l eurobottle/can/container) 70000804
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.