perform® pro
- very good material compatibility
- broad spectrum of activity (virucidal, tuberculocidal, sporicidal (C. difficile))
- active oxygen based
Source of supply
Further information
Fields of Application
perform® pro is suitable for disinfecting surfaces and medical devices. Through the enhancement of a very well-established product with a broad spectrum of activity and high material compatibility, perform® pro can be used in all hospital areas. In addition, the product has been improved so that it also meets the current requirements of the Biocidal Products Regulation.
Instructions for use
To prepare the working solution, fill the bucket with water (max.30°C), add the product and dissolve:
- 1 bag (40 g) to 8 l of water = 0.5% solution
- 2 bags (80 g) to 8 l of water = 1% solution
When using the box, the corresponding dosing is carried out according to the box label. The prepared working solutions have a lifetime of 24 hours (≤ 25° C) and 4 hours (≤ 40° C) for guaranteed stability of the active ingredient. The working solution should be replaced earlier in case of heavy contamination.
Ensure that all visible dirt is removed before disinfection. Clean equipment thoroughly with water.
Surface disinfection: Apply the working solution in the desired concentration to the floor using the 2-step wiping procedure. Wet wipe medical devices and other surfaces. To avoid formation of residues, only minimal residual moisture should remain on the surface after the second wiping step.
Certificates / Norms
0297Product data
Composition: 49.5 g pentapotassium bis(peroxymonosulphate) bis(sulphate). Contains: sodium (1-hydroxyethylidene)bisphosphonate, sodium dodecyl sulphate,
(+)-tartaric acid.
Chemical-physical data
Special advice
Use disinfectants safely. Always read the label and product information before use.
Gloves must be worn. In the event of heavy soiling, change the working solution ahead of time. The working solution may have a bleaching effect on certain very sensitive textile dyestuffs. Only recycle completely emptied packaging. Leftover product can be disposed of with household waste. Ensure adequate ventilation at the site of use. perform® pro is also suitable for disinfecting respiratory and inhalation masks as well as training dummies. Clean the equipment and medical device thoroughly with water. Or immerse disassembled parts of medicale devices into the use solution. After the required contact time, rinse off with water. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. The working solution may have a bleaching effect on highly susceptible textile dyes.
For professional use only!
Information for order
| Item | Delivery form | Item | GTIN |
|---|---|---|---|
| perform pro -EU-N- 900 g DS | 4 / carton(s) | 70003658 | 4032651985258 |
| perform pro -PL- (250x) 40 g BT | 250 / carton(s) | 70003656 | 4032651985210 |
| perform pro (60x) 40 g BT | 60 / carton(s) | 70003654 | 4032651985180 |
| perform pro -PL,CZ,SK- 900 g DS | 4 / carton(s) | 70003659 | 4032651985272 |