dialox™ is a specially developed, highly effective disinfectant and descaling agent for hemodialysis machines and water treatment units. dialox™ is based on active oxygen.

Our Plus

  • A broad microbiological spectrum
  • Disinfection and decalcification in one step
  • Ready to use
  • Short contact time
  • More than 20 years of experience in dialysis centres


Fields of Application

Unique disinfectant and descaler for the hygiene of hydraulic circuits of dialysis machines and water treatment systems in dialysis centres.

Application tips
  • Compatible with dialysis machines
  • Compatible with water treatment equipment
  • Prevents the formation of biofilms on surfaces of hydraulic circuits

Instructions for use

dialox™ is used in the chemical disinfection program of hemodialysis machines and water treatment units for simultaneous disinfection and decalcification.

dialox™ is ready to use. No activation step is needed. The proportions are automatically calculated an diluted by the machines. Please follow the recommendations of the manufacturer of the dialysis equipment, e.g. 1/25 or 1/35 at 20°C or 37°C).

The rinse process has to be controlled in accordance with the operating instructions of the respective dialysis machine/ water treatment unit manufacturer by means of peroxide or peracetic acid test strips. The instructions for use of the test strips must be followed. Concentration of dialox™ in the circuits could be detected with conductivity property (depending of equipment of dialysis machine - see instructions of use of machine).

Microbiological efficacy

EfficacyConcentrationContact time
1 % (10 ml/l)
20 °C
10 min.
10 % (100 ml/l)
20 °C
15 min.
2.85 % (28.5 ml/l)
20 °C
10 min.
1 % (10 ml/l)
20 °C
10 min.
3 % (30 ml/l)
37 °C
10 min.
2 % (20 ml/l)
37 °C
30 min.

Product data

100 g concentrate contains the following active substances:
0,4% peracetic acid [CAS N° 79-21-0]
6,9% hydrogen peroxide [CAS N° 7722-84-1]
4,6% acetic acid [CAS N° 64-19-7]

Chemical-physical data

Flash point:not applicable
Density:1,03 g/cm3 / 20 °C
Viscosity, dynamic:not determined
pH:ca. 1,1 / 20 °C / concentrate

Special advice

Recommended storage temperature: 5-30°C. Provide sufficient air exchange and/or exhaust in work rooms. Handle and open container with care. Never return unused material to storage receptacle. Keep away from heat and direct sunlight. Store in a cool place. Do not keep container sealed. Store in up-right position only.

Compatibility with materials:
dialox™ has a good material compatibilty with stainless steel, PTFE, PVDF, PEHD, PP.

Mixing of dialox™ with other products should be avoided, particularly with aldehyds or derivates of halogens (e.g. sodium hypochlorite and others).

Information for order

ItemDelivery formItem no.
dialox (4 x 5 l KA)1/Canisteron request

These products are not available in every country. For more information please contact our local subsidiary or distributor.

Application aids

ItemItem no.
Can key for 5 + 10 l135810

Environmental information

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards. 

CE 0297
Bioxal SA
Route des Varennes - Secteur A
BP3007271103 Chalon-sur-Saône

Privacy Policy

We use analysis methods (e. g. cookies) to measure how often our site is visited and how it is used.
We embed third-party content from other providers (e. g. videos) on our site. We have no influence on further data processing and any tracking by the third party provider.
In this context, we also use service providers in third countries outside the EU that do not have an adequate level of data protection, which harbors the following risks: Access by authorities without informing the data subject, no data subject rights, no legal remedies, loss of control.
With your settings you consent to the processes described above. You can revoke your consent with effect for the future. You can find more information in our privacy policy.