perform®sterile PAA
Sterile ready to use solution based on peracetic acid for disinfecting surfaces in cleanrooms.
Our Plus
- fast, effective and sporicidal
- sterile (filled aseptically in cleanrooms A/B)
- microbial filtered (0,2 μm)
- ready to use in a handy, sterile 500 ml spray system
- colour and perfume free
- efficacy tested according to European norms (EN)
Downloads
Fields of Application
Disinfection of surfaces and equipment / devices in cleanrooms, in particular for class A and B cleanroom areas, according to:
- Annex 1 of EU Guide to Good Manufacturing Practice: Manufacture of sterile medicinal products, March 2009.
- FDA Guidance for Industry: Sterile drug products produced by aseptic processing - current Good Manufacturing Practice; U.S. Department of Health and Human Services, Food and Drug Administration, September 2004.
Instructions for use
Apply perform® sterile PAA undiluted to pre-cleaned objects and surfaces and allow to take effect, ensuring that all surfaces are moistened completely.
Microbiological efficacy
| Efficacy | Concentration | Contact time |
|---|---|---|
| bactericidal EN1276, EN13697 | ready-to-use | 5 min. |
| fungicidal EN1650, EN13697 | ready-to-use | 5 min. |
| virucidal against enveloped viruses in accordance with DVV (German Registered Association for Combating Viral Diseases) | ready-to-use | 1 min. |
| sporicidal EN13697, EN13704 | ready-to-use | 5 min. |
Product data
Composition:
100 g solution contains the following active substances: 0.09 g peracetic acid.
Chemical-physical data
Flash point:> 105 °C
Form:liquid
Colour:colourless
Density:1,01 g/cm3 / 20 °C
Viscosity, dynamic:1,05 mPa*s / 20 °C
pH:ca. 3,5 / 10 g/l / 20 °C / in water
Special advice
Use disinfectants safely. Always read the label and product information before use.
Professional use only. Read safety data sheet before use.
Good material compatibility with stainless steel, PTFE, PVDF, PEHD, PP, Viton, glass, etc.
Contact with non-ferrous metals (brass, copper) should be avoided. Wearing of protective gloves (e.g. made of Nitrile rubber) is recommended. Carry and store product container in an upright position.
Professional use only. Read safety data sheet before use.
Good material compatibility with stainless steel, PTFE, PVDF, PEHD, PP, Viton, glass, etc.
Contact with non-ferrous metals (brass, copper) should be avoided. Wearing of protective gloves (e.g. made of Nitrile rubber) is recommended. Carry and store product container in an upright position.
Information for order
| Item | Delivery form | Item no. |
|---|---|---|
| perform® sterile PAA 500 ml bottle | 10/Carton | on request |
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Environmental information
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.
