perform®sterile concentrate Q2
Sterile, liquid concentrate for disinfection and cleaning surfaces, based on a combination of quaternary ammonium compounds and amine derivatives
Our Plus
- disinfection and cleaning in one step
- sterile (X-Ray irradiated)
- alkaline pH
- effective against bacteria and fungi
- rinses off residue-free
- free of aldehyde and PHMB
- colour and perfume free
- efficacy tested according to European norms (EN)
Downloads
Fields of Application
Disinfection of surfaces and equipment/devices in cleanrooms. Especially for Grade A and B clean areas, according to:
- EU Guidelines to Good Manufacturing Practice for medicinal products, Annex 1: Manufacture of sterile medicinal products; March 2009
- FDA Guidance for Industry: Sterile drug products produced by aseptic processing - current good manufacturing practice, U.S. Department of Health and Human Services; Food and Drug Administration; September 2004.
Instructions for use
Prepare the working solution by filling water of an appropriate quality into a tub or bucket. Add the concentrate to the water and stir gently.
For example:
1 bottle (60 ml) for 4 L = 1,5 % solution.
Wipe the surfaces until they are well wetted and observe required contact time.
Microbiological efficacy
| Efficacy | Concentration | Contact time |
|---|---|---|
| bactericidal EN1276, EN13697 | 1.5 % (15 ml/l) | 15 min. |
| yeasticidal EN1650, EN13697 | 1.5 % (15 ml/l) | 15 min. |
| virucidal against enveloped viruses in accordance with DVV (German Registered Association for Combating Viral Diseases - clean conditions | 1.5 % (15 ml/l) | 5 min. |
Product data
Composition:
100 g solution contains the following active substances: 10 g Didecyldimethylammonium chloride, 2 g N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine
Labelling according to Regulation (EC) No. 648/2004: < 5 % non-ionic surfactants
100 g solution contains the following active substances: 10 g Didecyldimethylammonium chloride, 2 g N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine
Labelling according to Regulation (EC) No. 648/2004: < 5 % non-ionic surfactants
Chemical-physical data
Flash point:49 °C / Method:DIN 51755 Part 1
Form:liquid
Colour:colourless
Density:ca. 0,98 g/cm3 / 20 °C
Viscosity, dynamic:ca. 23 mPa*s / 20 °C / Method : ISO 3219
pH:ca. 9 / 20 °C
Special advice
Use disinfectants safely. Always read the label and product information before use.
Information for order
| Item | Delivery form | Item no. |
|---|---|---|
| perform® sterile concentrate Q2 China 5x60 ml FL | 4/Carton | on request |
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Environmental information
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.