thermosept®X·tra

Mildly alkaline high performance cleaner for the automated reprocessing of medical devices

Our Plus

  • excellent cleaning performance achieved by the synergistic combination of active substances of enzymes and surfactants
  • low foaming formular
  • optimized material compatibility, also suitable for anodized aluminium
  • high economic efficiency due to low working concentration
  • pH of >10 in the cleaning solution - risk reduction in the case of vCJK according to the recommendation of the German RKI (Robert-Koch Institute)
  • silicate-free

Downloads

Fields of Application

thermosept® X•tra is designed for the automated cleaning of medical devices and accessories e.g. surgical instruments, minimally invasive surgical instruments, including robotic instruments, materials used in anaesthesia, ophthalmological instruments, rigid endoscopes, containers and other instruments commonly used in the Central Sterile Supply Department. Product can be used in all common types of washer/disinfectors (WD) and tunnel/washers. The outstanding cleaning performance is based on the combination of an innovative system of detergents combined with high-performance enzymes. The activity of the special enzyme variant develops initially in the application solution - in this way, powerful performance is achieved directly in the cleaning phase in WD. Even at low doses, thermosept® X•tra removes organic contaminants such as blood, proteins, tissue residues as well as mucus and fatty impurities. The synergistic combination of active ingredients allow excellent compatibility with materials, even with sensitive materials such as anodized aluminum and non-ferrous metal. With a pH-value of >10, a ten-minute cleaning time and an elevated, non-protein-fixing process temperature during the cleaning phase, thermosept® X•tra contributes to risk reduction with regard to vCJK according to the German RKI recommendation. Released for the manual pretreatment and automated reprocessing of Intuitive Surgical® da Vinci robotic instruments.

Instructions for use

Dosage:
Standard concentration: 0.5 % (5 ml/l)
Depending on the degree of soiling: 0.3 - 1.0 % (3 - 10 ml/l)
Cleaning temperature standard: approx. 55°C (30 - 65 °C), cleaning time approx. 5 - 10 minutes
Cleaning indicators: All common indicators can be used.
Do not use thermosept® X•tra in combination with other products. The use of purified water is recommended. The neutralisation step required for classical alkaline cleaning agents is not necessary. When preparing ocular instruments, two interim rinsing steps with purified water before thermal disinfection are recommended or use neutraliser thermosept® NKZ. Please note recommendations of machine and instrument manufacturers.

Product data

Composition:
Labelling according to Regulation (EC) No. 648/2004: 5 - 15 % anionic surfactants, < 5 % nonionic surfactants, < 5 % polycarboxylate, enzymes.
Other ingredients: Solubiliser, corrosion inhibitors.



Chemical-physical data

Flash point:> 100 °C / Method : DIN 51755 Part 1
Density:ca. 1,10 g/cm3 / 20 °C / 1.013 hPa
Form:liquid
Viscosity, dynamic:ca. 9 mPa*s / Method : ISO 3219
pH:ca. 11 / 20 °C

Special advice

Keep container tightly closed. Store at room temperature in the original container. Protect from frost, heat and sunlight. (Storage temperature: 5 - 25 °C).

Information for order

ItemDelivery formItem no.
thermosept X·tra 5 l KA1/canisteron request

These products are not available in every country. For more information please contact our local subsidiary or distributor.

Environmental information

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
CE

Privacy Policy

We use analysis methods (e. g. cookies) to measure how often our site is visited and how it is used.
We embed third-party content from other providers (e. g. videos) on our site. We have no influence on further data processing and any tracking by the third party provider.
In this context, we also use service providers in third countries outside the EU that do not have an adequate level of data protection, which harbors the following risks: Access by authorities without informing the data subject, no data subject rights, no legal remedies, loss of control.
With your settings you consent to the processes described above. You can revoke your consent with effect for the future. You can find more information in our privacy policy.