gigasept^® pearls

• For manual prophylactic or final disinfection and cleaning of non-invasive and invasive instruments (thermostable, thermolabile) as well as medical devices that can be reprocessed using an immersion bath.
• Very suitable for the reprocessing of flexible endoscopes and sensitive materials such as silicone, polycarbonate, polysulfone and acrylic glass.
• The pH of gigasept^® pearls can be buffered into a neutral range by adding special additives. This prevents protein coagulation (fixation of proteins to surfaces) and also achieves optimal material compatibility.
• In addition to manual reprocessing, gigasept^® pearls are also suitable for use in ultrasonic baths.

High-level disinfectant and cleaning granules containing Sodium Percarbonate and Tetraacetylethylenediamine (TAED) for effective cleaning and high-level disinfection of medical instruments and devices. Provides broad-spectrum antimicrobial efficacy with excellent cleaning performance against organic contaminants.

Passes EN Standards - EN 13624, EN 13727, EN 14348, EN 14561, EN 14562, EN 14563, EN 17111, EN 13704, EN 17126 and EN 14476 standards.

• gigasept^® pearls are dissolved in cold water (10 °C - 25 °C, at least drinking water quality) and diluted to the desired application concentration.
• Dosage: 1.0 % - 2.0 %, depending on microbiological efficacy. The solution is prepared using the enclosed dosing aid. Clean off any visible contamination from instruments / medical devices before disinfection and then rinse, preferably with demineralised water.
• Application example: 10 litres of a 2 % working solution corresponds to 9.8 litres of water and 200 g (200 g = 300 ml) of gigasept^® pearls.
• Add water and stir several times during the first 15 minutes after sprinkling in the appropriate amount of gigasept^® pearls. After this activation time, the working solution is ready to use.
• Minor, undissolved residue does not affect the efficacy of the working solution but is an additional activity deposit.
• Place instruments / medical devices in the working solution immediately after use.
• Ensure complete wetting, especially of hollow instruments / medical devices, and allow it to take effect.
• After reprocessing, rinse the instruments / medical devices thoroughly, preferably with demineralised water, to completely remove residue of the working solution.
• The reprocessing recommendations of the respective instrument / medical device manufacturers must be complied with.
• Do not mix with cleaners or other disinfectants. National regulations may require that cleaning and disinfection are carried out in two separate process steps.
• Standing time: Renew the working solution every workday and if there is visible contamination.

Composition:
100 g of gigasept^® pearls contain the following active substances: 43.0 g sodium percarbonate, 22.0 g tetraacetylethylenediamine.
Labelling according to Regulation (EC) No. 648/2004:
> 30 % oxygen-based bleach, < 5 % non-ionic surfactants, < 5 % phosphates,< 5 % EDTA, enzymes, perfumes.