dentavon®ID
- good material compatibility
- broad spectrum of efficacy (bactericidal, yeasticidal and virucidal)
- based on active oxygen
- uses the immersion method which creates no aerosols and ensures every surface of the impression is disinfected
Further information
Fields of Application
For the disinfection of dental impressions made of silicone, polyether, alginate by submersion.
Instructions for use
The active substance system of prepared working solutions remains stable over a holding time of 8 h at 25 °C and ensures full microbiological efficacy during this time. The working solution should be changed if it is visibly contaminated. To avoid the transmission of microbes and infections, the dental impressions should always be disinfected in the dental practice before shipment to the dental laboratory. If the dental laboratory is unsure whether impressions were disinfected, disinfection must be performed in any case after receipt of materials from the practice.
Dosage instructions and information for use:
Rinse off impressions under running water. Fill container with water (max. 30°C), add product and dissolve. The desired batch quantity is indicated in the dosing table. The amount of powder needed must be weighed out. Place impressions in the prepared solution, ensure the appropriate contact time, and then rinse off once again under running water
Microbiological efficacy
| Test method | 1 % | ||
|---|---|---|---|
| Bacteria, yeasts and mycobacteria | |||
| bactericidal | EN 13727; EN 14561 clean conditions | 5 min. / 20 °C | |
| yeasticidal | EN 13624; EN 14562 clean conditions | 5 min. / 20 °C | |
| Viruses | |||
| virucidal activity | EN 14476; EN 17111 clean conditions | 5 min. / 20 °C | |
Certificates / Norms
0297Product data
Composition:
100 g contain: 49,5 g pentapotassium bis(peroxymonosulphate) bis(sulphate). Contains: sodium (1-hydroxyethylidene) bisphosphonate, sodium dodecyl sulphate, (+)-tartaric acid
Special advice
Use disinfectants safely. Always read the label and product information before use. When disinfecting impressions with the product, compliance with the specified concentration and contact time in the immersion bath must be ensured. Gloves must be worn. The working solution may have a bleaching effect on sensitive textiles. Keep container tightly closed. Protect from frost, heat and sunlight. Store at room temperature in the original container. Only recycle completely emptied packaging. Leftover product can be disposed of with household waste. Ensure adequate ventilation at the site of use.
For professional use only
Information for order
| Item | Delivery form | Item | GTIN |
|---|---|---|---|
| dentavon ID 900 g DS | 4 / carton(s) | 70003653 | 4032651985166 |