mikrozid® universal p liquid

Low-alcohol solution for gentle disinfection and cleaning of medical devices and surfaces
Our Plus
Downloads

  • Quickly and comprehensively effective against bacteria, yeasts and enveloped viruses, as well as some non-enveloped viruses
  • Effective against noroviruses as of 30 seconds
  • Limited spectrum of virucidal activity in 5 minutes – in accordance with the requirements of EN 14885 for high-touch surfaces
  • Microbiologically tested according to the latest standards – under practical conditions with high organic load
  • High material compatibility even on sensitive surfaces such as mobile phones and displays
  • Skin compatibility dermatologically confirmed and can also be used without gloves*

 

Further information

Fields of Application

The product is suitable for gentle, simple rapid disinfection and cleaning of medical devices, medical equipment and all types of surfaces, including the patient environment. The ready-to-use and versatile solution has been specially developed for sensitive surfaces: mobile phones, touchscreens, displays, keyboards, imitation leather and hospital furniture are disinfected reliably and gently.

Instructions for use

Ensure that all visible dirt is removed before disinfection.

  • Spray application: Spray surfaces from a distance of at least 30 cm (approx. 40 ml/m2) and wipe with a cloth and allow to take effect.
  • Application with screw cap: Apply undiluted to the surface, wipe and allow to take effect.

Ensure complete wetting. Ensure that the bottle is closed after use.

Microbiological efficacy

Test methodready-to-use
Bacteria, Yeast and Mycobacteria
bactericidalEN 13727; EN 16615; VAH dirty conditions1 min.
mycobactericidalEN 14348 dirty conditions5 min.
tuberculocidalEN 14348 dirty conditions5 min.
yeasticidalEN 13624; EN 16615; VAH dirty conditions1 min.
Virus
limited spectrum virucidal activityEN 14476; EN 16615 (mod.) dirty conditions5 min.
NorovirusEN 14476 dirty conditions30 sec.
NorovirusEN 16615 (mod.) dirty conditions1 min.
virucidal against enveloped virusesEN 16615 (mod.) dirty conditions1 min.
virucidal against enveloped virusesEN 14476 dirty conditions15 sec.

Certificates / Norms

0297

Product data

100 g of active ingredient solution contains the following effective components: 22.5 g propan-2-ol, 2.5 g propan-1-ol, 1.54 g glycolic acid. Labelling in accordance with Regulation (EC) No. 648/2004: < 5% anionic surfactants.

Special advice

Use disinfectants safely.

Always read the label and product information before use.

The product has good material compatibility with metals and plastics, including acrylic glass (PMMA-GS). Do not use on alcohol-sensitive lacquers. Please observe the fire and explosion protection regulations when using alcoholic disinfectants in accordance with the BR rule "Disinfection work in healthcare". Keep away from heat and sources of ignition. Further information is available on request. The shelf life of opened containers is indicated on the packaging.

The following sizes are available:

  • mikrozid® universal p liquid 1 L spray bottle
  • mikrozid® universal p liquid 1 L bottle
  • mikrozid® universal p liquid 5 L canister

Keep container tightly closed. Store in the original container. Only dispose of packaging in the recycling bin once it has been completely emptied. Residual contents can be disposed of under EAK 07 06 01. The suitability of the spectrum of activity must be checked for the intended area of application. Not suitable for virucidal final disinfection of semi-critical and critical medical devices! Only treat small areas. The wiping range depends on the room temperature and the structure of the surface to be disinfected. Further information is available on request. Serious incidents related to the product must be reported to the manufacturer and the competent authority.

For professional use only.

Information for order

ItemDelivery formItem
mikrozid universal p liquid 1 l FL10 / carton(s)on request
mikrozid universal p liquid 5 l KA1 / canister(s)on request
mikrozid universal p spray 1 l FL10 / carton(s)on request
These products are not available in every country. For more information please contact our local subsidiary or distributor.

Application aids

ItemDelivery form
Wall set for 1l bottles
1
Bed bracket for square bottle 1 l (straight)
1
wall bracket plastics 1l
1
dosing pump 5 l
1
tap for 5/ 10 lt can neutr.
1
key for can 5/ 10 l neutr.
1
Trichter
1

Environmental information

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.

* Provided that infection control and occupational safety regulations allow.

Downloads

Data protection notice

We use analysis methods (e.g. cookies) to measure how often our website is visited and how it is used. We also use cookies to link your page visits and website usage with your customer data stored in our CRM system in order to be able to address you individually, i.e. based on your interests and usage. We alsowe embed third-party content from other providers (e.g. videos). We have no influence on further data processing and any tracking by the third-party provider.In this context, we also use service providers in third countries outside the EU that may not guarantee an adequate level of data protection, which entails the following risks Access by authorities without informing the data subject, no data subject rights, no legal remedies, loss of control.By hiring us, you consent to the processes described above. You can revoke your consent with effect for the future. You can find more information in our privacy policy