perform® ID
- bactericidal, levurocidal and virucidal spectrum of efficacy
Further information
Fields of Application
Instructions for use
The efficacy of the working solution compound stays stable for the duration of 1 working day and therefore guarantees full microbiological efficacy during this period. Only in case of excessive soiling the working solution should be changed in shorter intervals. Considering hygienic aspects and in order to avoid bacteria- and infection transmission, the disinfection of dental impressions should always be effected at the dental practice prior to the transfer of the impressions to the dental laboratory. If the dental laboratory is not sure, if the impressions have been disinfected, a disinfection of the material from the practice should be effected in all instances.
Dosing and use:
Rinse the impressions under running water. Dissolve 2 level measuring scoops of the product in 2 litres water (= 2 % solution). Place the impression in the solution, leave to react for the mentioned time and then rinse the pieces again under running water.
Certificates / Norms
0297Product data
100 g granules contains the following active substances: 45 g Pentapotassium bis(peroxymonosulphate)bis(sulfate)
Labelling according to Regulation (EC) No 648/2004:
5 - 15 % anionic surfactants; < 5 % non-ionic surfactants; < 5 % soap and phosphonates, perfumes
Chemical-physical data
Special advice
Always read label and product information before use.
During the disinfection of impressions with the product the prescribed application concentration as well as the reaction time in the immersion bath should be particularly observed. Do not ingest. Avoid contact with skin and eyes. Rinse the affected body parts with plenty of water. We recommend using gloves when handling the product. The solution may act as a bleach on sensitive textiles. Keep container tightly closed. Protect from frost, heat and sunlight. Store at room temperature in the original container. Only recycle completely emptied packaging. Leftover product can be disposed of with household waste. Ensure adequate ventilation at the site of use. For professional use only. Not for final disinfection of semicritical and critical medical devices.
Information for order
| Item | Delivery form | Item |
|---|---|---|
| perform® ID tin (900g) | 4 / carton(s) | on request |
| perform® ID bag (120 x 40g) | 1 / carton(s) | on request |