This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 
 
 

dialox™

dialox™ is a specially developed, highly effective disinfectant and descaling agent for hemodialysis machines and water treatment units. dialox™ is based on active oxygen.

Downloads

Our Plus

  • A broad microbiological spectrum
  • Disinfection and decalcification in one step
  • Ready to use
  • Short contact time
  • More than 20 years of experience in dialysis centres
Expand All
Collapse All
Fields of Application
 
Unique disinfectant and descaler for the hygiene of hydraulic circuits of dialysis machines and water treatment systems in dialysis centres.

Application tips
  • Compatible with dialysis machines
  • Compatible with water treatment equipment
  • Prevents the formation of biofilms on surfaces of hydraulic circuits
Instructions for use
 
dialox™ is used in the chemical disinfection program of hemodialysis machines and water treatment units for simultaneous disinfection and decalcification.
dialox™ is ready to use. No activation step is needed. The proportions are automatically calculated an diluted by the machines. Please follow the recommendations of the manufacturer of the dialysis equipment, e.g. 1/25 or 1/35 at 20°C or 37°C).
The rinse process has to be controlled in accordance with the operating instructions of the respective dialysis machine/ water treatment unit manufacturer by means of peroxide or peracetic acid test strips. The instructions for use of the test strips must be followed. Concentration of dialox™ in the circuits could be detected with conductivity property (depending of equipment of dialysis machine - see instructions of use of machine).
Microbiological efficacy
 
Efficacy Concentration Contact time
bactericidal
EN14561
1 % (10 ml/l)
20 °C
10 min.
mycobactericidal
EN14348
10 % (100 ml/l)
20 °C
15 min.
mycobactericidal
EN14563
2.85 % (28.5 ml/l)
20 °C
10 min.
yeasticidal
EN14562
1 % (10 ml/l)
20 °C
10 min.
fungicidal
EN14562
3 % (30 ml/l)
37 °C
10 min.
virucidal
EN14476
2 % (20 ml/l)
37 °C
30 min.
Product data
 
Composition:
100g of dialox™ contain the following active ingredients:
0,4% peracetic acid [CAS N° 79-21-0]
6,9% hydrogen peroxide [CAS N° 7722-84-1]
4,6% acetic acid [CAS N° 64-19-7]

Chemical-physical data

Density:1,03 g/cm3 / 20 °C
Form:liquid
Color:colourless
Viscosity, dynamic:not determined
Flash point:Not applicable
pH:ca. 1,1 / 20 °C / concentrate
Special advice
 
Recommended storage temperature: 5-30°C. Provide sufficient air exchange and/or exhaust in work rooms. Handle and open container with care. Never return unused material to storage receptacle. Keep away from heat and direct sunlight. Store in a cool place. Do not keep container sealed. Store in up-right position only.
Compatibily with materials


dialox™ has a good material compatibilty with stainless steel, PTFE, PVDF, PEHD, PP.


Interactions

Mixing of dialox™ with other products should be avoided, particularly with aldehyds or derivates of halogens (e.g. sodium hypochlorite and others).
Information for order
 
ItemDelivery formItem no.
dialox (4 x 5 l KA)1/Canisteron request
dialox 10 l KA/Cartonon request
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Application aids
 
Item Item no.
Can key for 5 + 10 l 135810
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
CE 0297
Manufacturer:
Bioxal SA
Route des Varennes - Secteur A
BP3007271103 Chalon-sur-Saône
France