This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 
 
 

gigasept® FF (new)

gigasept® FF (new) is a high-level desinfectant based on succinic dialdehyde for manual reprocessing.

Downloads

Our Plus

  • formaldehyde and GDA-free
  • broad microbiological efficacy
  • outstanding material compatibility
  • 14-days standing time
Expand All
Collapse All
Fields of Application
 
Disinfection of thermolabile and thermostable instruments, e.g. flexible and rigid endoscopes, water-tight ultrasound transducers, anaesthesia accessories, respirator masks, instruments etc.
Instructions for use
 
For professional use only.
gigasept® FF (new) is a concentrate and is diluted with cold water to produce the desired application concentration.
Application example: 1 litre of a 6 % working solution corresponds to 940 ml of water and 60 ml of gigasept® FF (new).
Place endoscopes and instruments for reprocessing in the gigasept® FF (new) solution. Ensure complete covering of the surfaces, also of hollow instruments, and allow to take effect. Rinse all instruments thoroughly after disinfection, using water of at least drinking water quality, or preferably sterile distilled water or fully deionised water, to completely remove residues of the solution. Please follow the reprocessing recommendations of the instrument manufacturers.
The working solution can be used for 14 days, for the disinfection of previously cleaned instruments only. National regulations may limit the timespan during which the solution can be used.
Apart from the manual treatment of endoscopes and instruments, gigasept® FF (new) is also suitable for semiautomated machines that operate by a cyclic process at room temperature.
Microbiological efficacy
 
Efficacy Concentration Contact time
bactericidal
EN13727, EN14561, in accordance with VAH
- dirty conditions
5 % (50 ml/l) 15 min.
bactericidal
EN13727, EN14561, in accordance with VAH
- dirty conditions
4 % (40 ml/l) 30 min.
bactericidal
EN13727, EN14561, in accordance with VAH
- dirty conditions
2 % (20 ml/l) 60 min.
tuberculocidal
EN14348, EN14563, in accordance with VAH
- dirty conditions
2 % (20 ml/l) 60 min.
tuberculocidal
EN14348, EN14563, in accordance with VAH
- dirty conditions
5 % (50 ml/l) 15 min.
tuberculocidal
EN14348, EN14563, in accordance with VAH
- dirty conditions
4 % (40 ml/l) 30 min.
mycobactericidal
EN14348, EN14563, in accordance with VAH
- dirty conditions
7 % (70 ml/l) 15 min.
mycobactericidal
EN14348, EN14563, in accordance with VAH
- dirty conditions
3 % (30 ml/l) 60 min.
mycobactericidal
EN14348, EN14563, in accordance with VAH
- dirty conditions
5 % (50 ml/l) 30 min.
yeasticidal
EN13624, EN14562, in accordance with VAH
- dirty conditions
4 % (40 ml/l) 30 min.
yeasticidal
EN13624, EN14562, in accordance with VAH
- dirty conditions
5 % (50 ml/l) 15 min.
yeasticidal
EN13624, EN14562, in accordance with VAH
- dirty conditions
2 % (20 ml/l) 60 min.
virucidal against enveloped viruses
in accordance with DVV (German Registered Association for Combating Viral Diseases
1 % (10 ml/l) 15 min.
virucidal
in accordance with DVV (German Registered Association for Combating Viral Diseases
- without conditions
6 % (60 ml/l) 60 min.
virucidal
in accordance with DVV (German Registered Association for Combating Viral Diseases
- dirty conditions
8 % (80 ml/l) 60 min.
Clostridium difficile
- clean conditions
6 % (60 ml/l) 8 h
Product data
 
Composition:
100 g solution contain the following active substances: 93.9 g Reaction product of DMO-THF, ethanol and water.
Labelling according to Regulation (EC) no. 648/2004:
< 5 % phosphonates, < 5 % anionic surfactants, < 5 % non-ionic surfactants, perfumes, Methyl isothiazolinones.



Chemical-physical data

Form:liquid
Color:green
Viscosity, dynamic:No data available
Density:ca. 1,01 g/cm3 / 20 °C
Flash point:38,5 °C / Method : DIN 51755 Part 1
pH:6,3 - 6,6 / 20 °C
Special advice
 
Always read the label and product information before use.
Material compatibility:

metals, rubber, glass, plastics, flexible endoscopes.
Interactions:
As a general rule, do not mix gigasept® FF (new) with other products. If gigasept® FF (new) comes into contact with application solutions containing amines, there may be precipitation and irreversible discolorations, for example if cleaning agents containing amines are used during precleaning and are not adequately rinsed off.
Storage:
Do not store for long periods above 25 °C. Do not use preparation after expiry date.
Information for order
 
ItemDelivery formItem no.
gigasept FF neu 100 ml FL15/Cartonon request
gigasept FF neu 2 l FL5/Cartonon request
gigasept FF new 5 l KA1/Canisteron request
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
CE 0297

Related Products