mikrozid® AF liquid

Alcohol-based, rapid disinfection of non-invasive medical devices and surfaces.

Our Plus

  • broad efficacy within very short time
  • residue-free
  • ready to use


Fields of Application

The product is suitable for disinfecting medical devices and other surfaces. Our classic product among the rapid disinfectant oroducts is suitable for disinfecting near-patient surfaces with an increased risk of infection that require short exposure times.

Instructions for use

Apply undiluted to the surface, wipe and allow taking effect.
Ensure complete wetting and maintain the surface moist during the entire exposure time.
Ensure that all visible dirt is removed before disinfection.
Maximum yield of 50 ml/m². For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. Not for final disinfection of semicritical and critical medical devices!

Microbiological efficacy

EfficacyConcentrationContact time
EN13727, EN16615
- dirty conditions
ready-to-use1 min.
in accordance with VAH Guidelines with short contact times
ready-to-use1 min.
- dirty conditions
ready-to-use1 min.
EN13624, EN16615
- dirty conditions
ready-to-use1 min.
in accordance with VAH Guidelines with short contact times
ready-to-use1 min.
virucidal against enveloped viruses
- dirty conditions
ready-to-use30 sec.
limited spectrum virucidal activity
- dirty conditions
ready-to-use30 sec.
Polyoma SV40
in accordance with DVV (German Registered Association for Combating Viral Diseases
ready-to-use5 min.


  • IHO listed
  • VAH certificate
  • ÖGHMP certificate

Product data

100 g solution contains the following active substances:
25 g Ethanol (94 %), 35 g Propan-1-ol
Labeling according to Regulation (EC) No. 648/2004: perfumes

Chemical-physical data

Viscosity, dynamic:not determined
Flash point:27 °C / Method : DIN 51755 Part 1
Density:ca. 0,89 g/cm3 / 20 °C
pH:Not applicable

Special advice

Use disinfectants safely. Always read the label and product information before use.
The product has good material compatibility with metals and plastics (except acrylic glass and alcohol-sensitive paints).Surfaces that are particularly sensitive to alcohol, such as acrylic glass, must not be treated. When using alcoholic disinfectants, please observe the fire and explosion protection in accordance with the trade association regulation "Disinfection Work in Health Care". Keep away from heat and sources of ignition. Wearing protective gloves is advised. Further information is available on request.The shelf-life of the opened container can be found on the packaging.

Information for order

ItemDelivery formItem no.
mikrozid® AF liquid 10 l1/Canisteron request
mikrozid® AF liquid 200 l1/drum(s)on request
mikrozid® AF liquid 250 ml spray bottle10/Cartonon request
mikrozid® AF liquid 1 l bottle10/Cartonon request
These products are not available in every country. For more information please contact our local subsidiary or distributor.

Application aids

ItemItem no.
schülke dosing feeder 5 l / 10 l (20ml / stroke)117101
Decanter funnel117901
Compressed-air nozzle120001
schülke tap for 5 l / 10 l can135501
Can key for 5 + 10 l135810
measuring cup 50 ml136102
trigger-sprayer for 500 /1000 ml180124
Opener all-in-one (1l eurobottle/can/container)70000804

Environmental information

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.
EuroNormCE 0297

Privacy Policy

We use analysis methods (e. g. cookies) to measure how often our site is visited and how it is used. In addition, we use cookies to link your page visits and website use with your customer data stored in our CRM in order to be able to address you individually, i.e. based on interests and usage. We embed third-party content from other providers (e. g. videos) on our site. We have no influence on further data processing and any tracking by the third party provider.
In this context, we also use service providers in third countries outside the EU that do not have an adequate level of data protection, which harbors the following risks: Access by authorities without informing the data subject, no data subject rights, no legal remedies, loss of control.
With your settings you consent to the processes described above. You can revoke your consent with effect for the future. You can find more information in our privacy policy.