This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 

rotasept®

High performance, ready to use cleaning and disinfection solution for developed burs and other rotating instruments

Downloads

Our Plus

  • excellent material compatibility
  • corrosion-preventing
  • effective against bacteria (inc. TB), fungi and viruses (inc. HBV, HCV, HIV) in 15 mins
  • for quicker results insert the rotasept® bath into an ultrasonic bath



Expand All
Collapse All
Fields of Application
 
For the manual cleaning and disinfection of burs, cutters, diamond grinders and other rotating precision instruments. Due to its excellent material compatibility and comprehensive effectiveness rotasept® provides all important product properties for reprocessing rotating precision instruments.
Instructions for use
 
Add undiluted rotasept® to the rotasept® bur bath. Place each small rotating instrument in the bur bath solution immediately after use in order to avoiding surface drying of dirt. Cleaning and disinfection are guaranteed in one operation.
Do not mix with cleaning agents.
In order to avoid rust formation do not rinse instruments with water after removing from rotasept®. Use tweezers to place them on cellulose cloth and leave to dry. If necessary brush off persistent dirt and repeat the disinfecting process. Immersion time: 15 minutes. Longer disinfecting times should be avoided. Renew the used solution daily unless heavily soiled then renew immediately. Contact time in ultrasonic bath: 5 min. If sterilisation of the bur is necessary, rotasept® should be rinsed off and the instrument should be dried.
Material compatibility:

Alkali- and alcohol-sensitive plastics, aluminium parts and instruments which have been made using synthetic resin adhesives should not be placed in rotasept®. We recommend gigasept® instru AF for these instruments.
Microbiological efficacy
 
Efficacy Concentration Contact time
bactericidal
EN13727, EN14561, in accordance with VAH
- dirty conditions
ready-to-use 5 min.
bactericidal
in accordance with VAH
ready-to-use 15 min.
yeasticidal
EN13624, EN14562, in accordance with VAH
- dirty conditions
ready-to-use 5 min.
fungicidal
ready-to-use 15 min.
virucidal against enveloped viruses
in accordance with DVV
ready-to-use 5 min.
Vaccinia virus
ready-to-use 5 min.
virucidal
in accordance with DVV (German Registered Association for Combating Viral Diseases
- dirty conditions
ready-to-use 5 min.
Adenovirus
ready-to-use 5 min.
Poliovirus
in accordance with DVV
ready-to-use 5 min.
Polyoma SV40
ready-to-use 5 min.
Product data
 
Composition:
100 g rotasept® contains: 1.6 g potassium hydroxide, 10.0 g propan-2-ol, 0.1 g 2-ethylhexanol.
labelling according to Regulation (EC)648/2004: < 5 % non-ionic surfactants.

Chemical-physical data

Flash point:36 °C / Method : DIN 51755 Part 1
Color:colourless
Density:ca. 1.00 g/cm3 / 20 °C
Form:liquid
pH:13.7 / 20 °C
Special advice
 
For all of the related safety information please refer to the Safety Data Sheet. To request the Safety Data Sheet please
E-mail: tech.uk@schuelke.com
Accident insurance regulations specify that gloves should be worn when handling disinfectant. Do not store above room temperature.
Information for order
 
Item Delivery form Item no.
rotasept -INT- 2 l FL 5/Carton 104741
GTIN: 4032651047413
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.
Expert opinion and information
 
Please visit our website for an overview of all available literature/reports on all schulke products online at http://www.schuelke.com/
For any queries you might have about the product or using it please call 0114 2543500 or E-mail mail.uk@schuelke.com
CE 0297