mikrozid® PAA wipes

Sporicidal, peracetic acid-based wipes for disinfecting medical devices (e.g. TEE probes, endovaginal probes) and surfaces.

Our Plus

  • sporicidal effectiveness
  • can be used immediately - no activation required
  • Approved for TEE probes*

Downloads

Fields of Application

The product is suitable for disinfecting medical devices and other surfaces. With the unique oxidizing power of peracetic acid, the product offers sporicidal activity in case of an outbreak. mikrozid® PAA wipes are the ideal disinfection wipes for areas with a particularly high pathogen transmission risk because of their broad spectrum of efficacy and the rapidity with which they take effect. Examples include isolation rooms, operating theatres, intensive care units and the non-sterile side of the CSSD/ endoscopy or neonatology departments. The wipes are appropriate for disinfection of medical devices and other surfaces of all types. The prime areas of use are surfaces in close proximity to patients and surfaces with frequent hand or skin contact. The wipes can be used to reprocess semicritical A and critical A medical devices, as long as the reprocessing manual of the individual manufacturers allows a wiping disinfection. For example:

  • TEE probes*
  • Nasopharyngoscope (ENT)
  • ultrasound probes*

After being disinfected, critical A and semi-critical medical A devices must be wiped again. Not suitable for reprocessing semi-critical B and critical B medical devices.

Microbiological efficacy

EfficacyConcentrationContact time
bactericidal
EN13727, EN16615
- dirty conditions
ready-to-use1 min.
tuberculocidal
EN14348
- dirty conditions
ready-to-use15 min.
yeasticidal
EN13624, EN16615
- dirty conditions
ready-to-use1 min.
fungicidal
EN13624
- dirty conditions
ready-to-use1 min.
limited spectrum virucidal activity
EN14476
- dirty conditions
ready-to-use1 min.
virucidal
EN14476
- dirty conditions
ready-to-use15 min.
Clostridium difficile
EN17126
- clean conditions
ready-to-use5 min.

Certificates

  • VAH certificate

Product data

Composition:
100 g solution contains the following active substances:
0.06 % peracetic acid; further ingredients: hydrogen peroxide, acetic acid

Chemical-physical data

Density:ca. 1,02 g/cm3 / 20 °C
Form:liquid
Flash point:> 100 °C
Color:colourless
pH:ca. 2,2 / 20 °C

Special advice

Use disinfectants safely. Always read the label and product information before use. Wearing protective gloves (e.g. made of nitrile rubber) is absolutely necessary. Do not use on non-ferrous metals and do not mix with other cleaning agents. Further information is available on request. Upon observance of the instructions, schülke guarantees a shelf life of 28 days once the package has been opened.
Instruction for use

Thoroughly wipe the surface with the cloth and allow the active ingredient solution taking effect. Ensure complete wetting of the surfaces. Ensure that all visible dirt is removed before disinfection. Treat only small areas. The wiping area depends on the room temperature and the structure of the surfaces to be disinfected. Pay attention to hygienic aspects when opening and threading the first cloth. Make sure to close the lid after use. If necessary, use several cloths for application on larger surfaces. Make sure to close the lid after use. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority.

Information for order

ItemDelivery formItem no.
mikrozid PAA wipes -INT- 50 ST DS10/Cartonon request
These products are not available in every country. For more information please contact our local subsidiary or distributor.

Application aids

ItemItem no.
wall bracket Jumbo tub134421

Environmental information

schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.
EuroNormCE 0297
*Upon compliance with the manufacturer's instructions and recommendations, mikrozid® PAA wipes are suitable in terms of material compatibility for the preparation of ultrasonic heads and probes of all leading manufacturers (e.g. BK Ultrasound, Philips, Siemens, Toshiba, Canon, Esaote). This is subject to the condition that the ultrasound heads and probes may in principle be processed using peracetic acid-based products.

Privacy Policy

We use analysis methods (e. g. cookies) to measure how often our site is visited and how it is used.
We embed third-party content from other providers (e. g. videos) on our site. We have no influence on further data processing and any tracking by the third party provider.
In this context, we also use service providers in third countries outside the EU that do not have an adequate level of data protection, which harbors the following risks: Access by authorities without informing the data subject, no data subject rights, no legal remedies, loss of control.
With your settings you consent to the processes described above. You can revoke your consent with effect for the future. You can find more information in our privacy policy.