dentavon®ID
- good material compatibility
- broad spectrum of efficacy (bactericidal, yeasticidal and virucidal)
- based on active oxygen
Source of supply
Further information
Fields of Application
For the disinfection of dental impressions made of silicone, polyether, alginate by submersion.
Instructions for use
The active substance system of prepared working solutions remains stable over a holding time of 8 h at 25 °C and thus ensures full microbiological efficacy during this time. The working solution should be changed if it is visibly contaminated. From the standpoint of hygiene and to avoid the transmission of microbes and infections, the dental impressions should always be disinfected in the dental practice before shipment to the dental laboratory. If the dental laboratory is unsure whether impressions were disinfected, disinfection must be performed in any case after receipt of materials from the practice.
Dosage instructions and information for use:
Rinse off impressions under running water. Fill container with water (max. 30°C), add product and dissolve. The desired batch quantity is indicated in the dosing table. The amount of powder needed must be weighed out. Place impressions in the prepared solution, ensure the appropriate contact time, and then rinse off once again under running water
Certificates / Norms
0297Product data
Composition:
100 g contain: 49,5 g pentapotassium bis(peroxymonosulphate) bis(sulphate). Contains: sodium (1-hydroxyethylidene) bisphosphonate, sodium dodecyl sulphate, (+)-tartaric acid
Chemical-physical data
Special advice
Use disinfectants safely. Always read the label and product information before use. When disinfecting impressions with the product, compliance with the specified concentration and contact time in the immersion bath must be ensured in particular. Gloves must be worn. The working solution may have a bleaching effect on sensitive textiles. Keep container tightly closed. Protect from frost, heat and sunlight. Store at room temperature in the original container. Only recycle completely emptied packaging. Leftover product can be disposed of with
household waste. Ensure adequate ventilation at the site of use.
For professional use only!
Information for order
| Item | Delivery form | Item |
|---|---|---|
| dentavon ID 900 g DS | 4 / carton(s) | on request |