This website uses cookies. By using this website, you agree with the use of cookies. Privacy Policy Information
 
 
 

terralin® liquid

Alcohol-based rapid disinfectant for the disinfection of medical products.

Downloads

Our Plus

  • aldehyde free
  • ready-to-use
  • rapid and effective in many applications
  • dries rapidly, leaving no streaks
Expand All
Collapse All
Fields of Application
 
Alcohol-based rapid disinfection of medical devices in all areas and wipeable surfaces with an increased risk of infection and where short contact times are required, e.g.:
  • Patient nearby surfaces
  • Patient treatment units
  • Examination couches
  • Operating tables and nearby work surfaces
  • Surfaces of medical equipment
Instructions for use
 
Apply to surfaces undiluted, wipe and allow to take effect. Make sure to wet surfaces completely and keep them wet for the whole exposure time. Maximum application rate 50 ml/m². Make sure that all visible soiling is removed before disinfection and the lid is tightly closed after use. Do not treat surfaces that are sensitive to alcohol, e.g. acrylic glass. Not for final disinfection of semicritical and critical medical devices!
Microbiological efficacy
 
Efficacy Concentration Contact time
bactericidal
in accordance with VAH Guidelines with short contact times
ready-to-use 1 min.
MRSA
ready-to-use 1 min.
tuberculocidal
EN14348
ready-to-use 1 min.
virucidal against enveloped viruses
in accordance with DVV (German Registered Association for Combating Viral Diseases
ready-to-use 30 sec.
Norovirus
EN14476
ready-to-use 1 min.
Polyoma SV40
in accordance with DVV (German Registered Association for Combating Viral Diseases
ready-to-use 10 min.
Rotavirus
ready-to-use 30 sec.
Adenovirus (type 5)
in accordance with DVV (German Registered Association for Combating Viral Diseases
ready-to-use 5 min.

Certificates

  • VAH certificate
  • IHO listed
Product data
 
Composition:
100 g contain the following active ingredients:
25 g Ethanol (94 %), 35 g Propan-1-ol

Chemical-physical data

Viscosity, dynamic:not determined
Flash point:27 °C / Method : DIN 51755 Part 1
Density:ca. 0,89 g/cm3 / 20 °C
Form:liquid
Color:colourless
pH:Not applicable
Special advice
 
Always read the label and product information before use. The product is highly compatible with metals and synthetics (except acrylic glass and alcohol-sensitive varnishes). Please follow carefully any national fire and explosion protection guidelines when using alcohol-based disinfectants.
Information for order
 
ItemDelivery formItem no.
terralin® liquid 1 l bottle10/Cartonon request
terralin® liquid 10 l1/Canisteron request
These products are not available in every country. For more information please contact our local subsidiary or distributor.
Application aids
 
Item Item no.
schülke dosing feeder 5 l / 10 l (20ml / stroke) 117101
Decanter funnel 117901
Compressed-air nozzle 120001
schülke tap for 5 l / 10 l can 135501
Can key for 5 + 10 l 135810
trigger-sprayer for 500 /1000 ml 180124
Environmental information
 
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
EuroNormCE 0297