perform® sterile alcohol IPA (WFI)
Sterile, alcohol based ready to use solution for surface disinfection in cleanrooms.
Our Plus
- fast, effective and residue free
- sterile (y-irradiated) and microbially filtered (0.2 μm)
- suitable for cleanrooms grade A/B, ISO class 5/6
- eady to use in a handy, sterile 500 ml spray system
- with WFI (Water for Injection)
- colour and perfume free
- efficacy tested according to European norms (EN)
Downloads
Fields of Application
Disinfection of surfaces and equipment / devices in cleanrooms, in particular for class A and B cleanroom areas, according to:
- Annex 1 of EU Guide to Good Manufacturing practice: Manufacture of sterile medicinal products, March 2009.
- FDA Guidance for Industry: Sterile drug products produced by aseptic processing - current Good Manufacturing practice; U.S. Department of Health and Human Services, Food and Drug Administration, September 2004.
Instructions for use
Apply perform® sterile alcohol IPA WFI undiluted to objects and surfaces and allow to take effect. Ensure complete wetting. The product dries off quickly. Maximum application rate 50 ml/sq.m. Do not use to treat surfaces that are particularly sensitive to alcohol, such as acrylic glass. perform® sterile alcohol IPA is also available with purified water (VE-water).
Microbiological efficacy
| Efficacy | Concentration | Contact time |
|---|---|---|
| bactericidal EN1276, EN13697 | ready-to-use | 1 min. |
| yeasticidal EN1650, EN13697 | ready-to-use | 1 min. |
| virucidal against enveloped viruses in accordance with DVV (German Registered Association for Combating Viral Diseases | ready-to-use | 30 sec. |
Product data
Composition:
100 g solution contains the following active substances: 63.1 g Propan-2-ol (equates 70% (v/v)).
100 g solution contains the following active substances: 63.1 g Propan-2-ol (equates 70% (v/v)).
Chemical-physical data
Color:colourless
Flash point:22 °C / Method : DIN 51755 Part 1
Form:liquid
Viscosity, dynamic:> 2.5 mPa*s / 20 °C / Raw material
Density:ca. 0.88 g/cm3 / 20 °C
pH:Not applicable
Special advice
Use biocides safely. Always read the label and product information before use.
For all of the related safety information please refer to the Safety Data Sheet. To request the Safety Data Sheet please
E-mail: tech.uk@schuelke.com
The sterile 500 ml spray system offers the following advantages:
For all of the related safety information please refer to the Safety Data Sheet. To request the Safety Data Sheet please
E-mail: tech.uk@schuelke.com
The sterile 500 ml spray system offers the following advantages:
- convenient size for handling and storage
- ergonomically shaped spray pump for ease of use
- remains sterile after opening
Information for order
| Item | Delivery form | Item no. |
|---|---|---|
| perform ster alc IPA WFI 500 ml FL | 10/Carton | 121101 GTIN: 4032651976003 |
Environmental information
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
Information
Please visit our website for an overview of all available literature/reports on all schulke products online at http://www.schuelke.com/
For any queries you might have about the product or using it please call 0114 2543500 or E-mail mail.uk@schuelke.com
For any queries you might have about the product or using it please call 0114 2543500 or E-mail mail.uk@schuelke.com