aspirmatic®
For the daily cleaning, disinfection and deodorising of all Dental system units an amalgam separators
Our Plus
- suitable for all amalgam seperators (eg Dürr, Metasys)
- can be used in all treatment units (eg Sironna, KaVo, Castellini, etc.)
- does not foam
- fresh smell
- tested and approved by Sirona
- economical use
Downloads
Fields of Application
For the daily cleaning, disinfection and deodorising of all Dental system units and amalgam separators.
Product Profile
The coordinated products aspirmatic® (cleaning disinfection) and aspirmatic® cleaner (special cleaner) ensure extensive cleaning and the necessary hygienic safety during practice operation. Due to the simple handling of the aspirmatic® system (dosing tank), the application of these products becomes a comfortable routine.
Instructions for use
Use once or twice daily. For best results use the aspirmatic® dosing system twice daily at the end of each clinical session. To make up use solution add 40 ml aspirmatic® to 1960 ml cold water. To ensure the solution does not foam when diluting always measure the correct amount of luke warm water first, then pour the correct amount of aspirmatic® in to the water.
Even easier: Calculate the right conentration for your ready-to-use solution with our DosageCal. Always available online as well as offline under www.concentrate-calculator-schuelke.com.
Suck 1 1/2 litres of use solution through the suction hoses and pour the remaining 1/2 litre in the rinse basin. Leave to soak for minimum of 30 minutes, or overnight. After soaking always rinse through with at least one litre of clean water before using the suction system. Dilute the product with cold water to get the required application concentration.
Even easier: Calculate the right conentration for your ready-to-use solution with our DosageCal. Always available online as well as offline under www.concentrate-calculator-schuelke.com.
Suck 1 1/2 litres of use solution through the suction hoses and pour the remaining 1/2 litre in the rinse basin. Leave to soak for minimum of 30 minutes, or overnight. After soaking always rinse through with at least one litre of clean water before using the suction system. Dilute the product with cold water to get the required application concentration.
Microbiological efficacy
| Efficacy | Concentration | Contact time |
|---|---|---|
| bactericidal in accordance with VAH | 2 % (20 ml/l) | 30 min. |
| yeasticidal in accordance with VAH | 2 % (20 ml/l) | 30 min. |
| virucidal against enveloped viruses in accordance with DVV (German Registered Association for Combating Viral Diseases | 2 % (20 ml/l) | 30 min. |
Certificates
- VAH certificate
Product data
Composition:
100 g concentrate contains the following active substances: 7,5 g dioctyl dimethyl ammonium chloride.
Labelling according to Regulation (EC) No 648/2004: < 5 % non-ionic surfactants, < 5 % soap, perfumes.
100 g concentrate contains the following active substances: 7,5 g dioctyl dimethyl ammonium chloride.
Labelling according to Regulation (EC) No 648/2004: < 5 % non-ionic surfactants, < 5 % soap, perfumes.
Chemical-physical data
Flash point:Not applicable
Form:liquid
Color:blue
Density:ca. 0,99 g/cm3 / 20 °C
Viscosity, dynamic:No data available
pH:6,5 - 7,5 / 20 °C
Special advice
Always read the label and product information before use.
The UVV (accident prevention regulations) require the persons dealing with disinfectants which are not determined for the skin to wear gloves. Do not use after the expiration date. Do not mix the concentrate or the ready-to-use solution of aspirmatic® and aspirmatic® cleaner.
The UVV (accident prevention regulations) require the persons dealing with disinfectants which are not determined for the skin to wear gloves. Do not use after the expiration date. Do not mix the concentrate or the ready-to-use solution of aspirmatic® and aspirmatic® cleaner.
Information for order
| Item | Delivery form | Item no. |
|---|---|---|
| aspirmatic® 2 l | 5/Carton | on request |
Application aids
| Item | Item no. |
|---|---|
| measuring cup 500 ml | 136101 |
| measuring cup 50 ml | 136102 |
| aspirmatic® system | 183701 |
Environmental information
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining out high quality standards.
0279